Use; Activating And Deactivating; Selecting A Source; Setting The Volume - Teufel cinebase Technical Description And Operating Instructions

Activating and deactivating

Switch the POWER mains switch (8) on to operate the
Cinebase ("ON" position).
• Turn the Cinebase on or to standby with the
button (12).
• If the TV-set connected via HDMI is CEC-capable,
the Cinebase will be switched on and to standby
together with the TV-set (see "Setting the HDMI
operating mode" on page 10).
• If a CEC-capable HDMI device is connected to the
HDMI IN port (2), the Cinebase and the TV-set will
be activated when activating the HDMI device.
• If the Cinebase does not receive a signal for longer
than 20 minutes, it will automatically switch to
standby.
When in standby, the power LED (11) will illuminate
in red.
The Cinebase is not disconnected from the mains
when in standby mode. Switch the POWER mains
switch (8) off to switch it off entirely ("OFF" position).

Selecting a source

Use the following buttons on the remote control to
select the source:
HDMI TV (19)
TV via HDMI (only for TVs with the
ARC function).
BLUETOOTH (20) Bluetooth device (see page 14).
ANALOG (21) analogue input.
HDMI (22) external HDMI device.
OPTICAL (23)
optical digital input.

Setting the volume

Use the buttons VOL +/VOL – (15) to set the desired
value.

Mute

By pushing the button (16), you can turn the sound
off and on again.
The power LED (10) will blink slowly in white during
muting.

Setting the bass tones

Use the BASS +/– (17) buttons to set the desired
value.
8
11 10
23
22
21

Use

12
15
16
17
19
20
• Cinebase 13