Basic Functions; Activating And Deactivating; Automatic Activation/Deactivation; Setting The Volume - Teufel MD16 Technical Description And Operating Instructions

Basic Functions

Switching on and off
• By turning the control dial ② clockwise, you can
switch the MD16 on and increase the volume at
the same time.
The first LED on the LED strip ③ will illuminate in
red. The more you increase the volume, the more
LEDs will light up.
• To turn the device off, turn the control dial ②
counter clockwise up to the stop. The device will
switch off with an audible click.

Automatic activation/deactivation

If the MD16 does not detect an audio signal via USB
or the AUX input, the MD16 will automatically switch
to standby after approx. 20 minutes.
As soon as an audio signal is detected on the
selected channel, the MD16 will automatically be
reactivated.
You can control the automatic activation
and deactivation with the POWER MODE
switch ⑫:
ON – The automatic function is not active;
the device is turned on and off manually.
AUTO USB – The automatic function
monitors the USB input (sound card).
AUTO AUX – The automatic function monitors the
AUX input.
• In standby mode, the LED STATUS ⑪
illuminates in red.
Note: The device is not disconnected from
the mains even when it is turned off or in
standby mode. To turn it off completely, pull
the wall adapter out of the socket.
10 • MD16
② ③
⑫
⑪

Setting the volume

• Increasing the volume: Turn the control dial ②
clockwise.
• Decreasing the volume: Turn the control dial ②
counterclockwise.
The LED strip ③ will display the selected volume
with up to 16 LEDs.
② ③