Advertisement
HIT-HY 100 Adhesive Anchoring System
HIT-HY 100 Adhesive Anchoring System
1.0
Product Description
2.0
Technical Data
Listings/Approvals
ICC-ES (International Code Council)
ESR-3574
NSF/ANSI Standard 61
Certification for use of HIT-HY 100 in
potable water
Independent Code
Evaluation
IBC
/IRC
2009 (ICC-ES AC308)
®
®
IBC
/IRC
2006 (ICC-ES AC308)
®
®
IBC
/IRC
2003 (ICC-ES AC308)
®
®
LEED
: Credit 4.1-Low Emitting Materials
®
The Leadership in Energy and
Environmental Design (LEED) Green
Building Rating system™ is the nationally
accepted benchmark for the design,
construction, and operation of high
performance green buildings.
Hilti HIT-HY 100 Adhesive Technical Data Table of Contents
Element Type
Pages
Tables
Information on Working Time and Cure Time on page 30
Information on Resistance of Cured Hilti HIT-HY 100 to Chemicals on page 30
4
Hilti, Inc. (USA) 1-800-879-8000 I www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I HIT-HY 100 Technical Supplement 01/14
1.0 Product
Description
The Hilti HIT-HY 100 Adhesive Anchoring
System is used to resist static, wind or
earthquake (Seismic Design Categories
A and B only) tension and shear loads
in normal-weight concrete having a
compressive strength, f´
to 8,500 psi (17.2 MPa to 58.6 MPa).
It is suitable to be used in uncracked
concrete as defined per
ICC-ES, ACI, and CSA.
Hilti HIT-HY 100 Adhesive is an
injectable two-component hybrid
adhesive. The two components are
separated by means of a dual-cylinder
foil pack attached to a manifold. The two
components combine and react when
dispensed through a static mixing
nozzle attached to the manifold.
Elements that are suitable for use with
this system are as follows: threaded
steel rods, Hilti HIS-(R)N steel internally
threaded inserts, and steel reinforcing
bars.
Rebar
Canada
United States
9 – 15
16 – 19
1 – 10
11 – 17
, of 2,500 psi
c
Hilti HAS
Threaded Rod
20 – 26
18 – 27
Hilti HIS-N and HIS-RN Internally
Threaded Insert
27 – 29
28 – 30
Advertisement
