Accessories; Bike Mount; Vehicle Mount; Carry Cases (Standard & Deluxe) - satmap active12 User Manual

17.

Accessories

Accessories
The following accessories are available from
Satmap. For a full range, please visit
www.satmap.com.

17.1 Bike Mount.

The Bike Mount has a robust, flexible fitting and
is designed for using the Active 12 GPS unit on a
bike. It can be attached to the handle bars, stem
or crossbar, allowing you to get the most out of
your cycling and mountain biking experience.The
Standard Battery Back of the Active 12 is replaced
with a Mount Battery Back which has a moulded
section and clips onto the Bike Mount.

17.2 Vehicle Mount.

The Vehicle Mount is a tough unit designed for
using the Active 12 GPS in motor vehicles. It has
a powerful suction cup for attachment to smooth
surfaces such as a windshield. It can also be fitted
to any flat surface, such as the dashboard, using the
adhesive Mounting Plate. This product will primarily
appeal to drivers of off-road vehicles where
navigation on accurate topographical mapping is a
must.
17.3 Carry Cases (Standard & Deluxe)
The Standard Carry Case has
compartment for the Active 12, closed with a Velcro
top for fast access, and an elasticated front mesh
for additional storage.
The Deluxe Carry Case has a main padded
compartment for the Active 12 itself and a
secondary compartment, ideal for storing spare
batteries, map cards, car keys, small mobile phone,
etc. There are also two mesh pockets on either side.
The zips are covered to provide weatherproofing,
and an additional elasticated front mesh provides
further storage.
Software v3.0.9915

17.4 Lanyard.

The Lanyard is 1.3m long, branded with the Satmap
logo, and is adjustable to fit most requirements.
It has two fittings on each end: a metal clip for
attaching to the D-Rings on the side of the carry
case, or a nylon hoop fitting for attaching directly
onto the shoulders of the Active 12 itself.

17.5 Screen Cover.

The removable Screen Cover is made of tough
polycarbonate and is easily replaced, ensuring
the view of the map is always at its best and never
obscured by scratches.

17.6 ProSHIELD (Silicon protective case)

The ProSHIELD is a silicon rubber protective case
that fits snugly around the Active 12 GPS unit. It
has been designed to provide increased impact
protection for the Active 12, allowing it to survive
drops of up to 3m onto concrete. It also provides
additional environmental protection against water
and dust (IP67), making it ideal for operating the unit
in extreme conditions. Available in black orange,
sand or green.
17.7 ZAGG invisibleSHIELD
The ZAGG invisibleSHIELD
indestructible film that will protect your Active 12
a padded
from unsightly scratches.

17.9 Standard Power Bundle

The Standard Power Bundle is a selection of power
options available for use with the Active 12 GPS. It
includes a 2700mAh rechargeable Lithium Polymer
(LiPol) battery which is optimized to last longer
over a wide range of temperatures and conditions.
The LiPol battery may be charged without removal
from the Active 12 via a USB connector, either from
a mains socket, laptop, computer or car cigarette
lighter.
TM
is a clear and virtually
TM
93
Bike Mount Vehicle Mount
Standard & Deluxe Carry Case
Lanyard
Spare screen covers
© Satmap Systems Ltd 2015