Edit Visibility; Edit Colour; Delete; Move To Sd Card - satmap active12 User Manual

13. LOIs (Lines of Interest) (... cont)

13.9 Edit Visibility

(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select LOI → Edit → Edit Visibility)
On selecting Edit Visibility you are taken to a
menu where you can hide or show your LOIs by
setting them as 'visible' or 'not visible' on your map.
Pressing Select takes you back to the edit menu.
Note: This is only respected if the global visibility is set
to 'Default' (GPS MAP → MAIN MENU → OOI Menu
→ 'Visibility - Default').

13.10 Edit Colour

(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select LOI → Edit → Edit Colour)
Highlight Edit Colour and use the joystick to make
a selection from the colour palette. As you move
the joystick over a colour, the LOI automatically
changes colour on the map. Once you are happy
with the colour choice, press Set to confirm or centre
press the joystick. This will take you back to the edit
menu.

13.11 Delete

(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select LOI → Edit → Delete)
Highlight Delete, then press Delete
the joystick to access a screen showing the option
to delete the LOI. When either Delete
selected, the screen will go back to the
menu.
Software v3.0.9915

13.12 Move to SD Card

(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select LOI → Edit → Move to SD Card)
(Only available if an SD card has been inserted)
the LOI from the SD card to the Internal Storage.
Move to SD Card
Highlight
centre press the joystick. (Subsequently this option
becomes Move from SD
to the OOI Folders
SD Card folder. To move the LOI from the SD card
you will need to select
edit menu.

13.13 Copy to SD Card

(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select LOI → Edit → Copy to SD Card)
(Only available if an SD card has been inserted)
a copy of the LOI onto the SD card. Highlight
to SD Card and either press
the joystick. (Subsequently this option becomes
Copy from SD
Folders
and a copy of the LOI will appear in the
Card folder.
or centre press
or Cancel is
EDIT LOI
.
Move
Move
and either press or
Card). The screen will go
and the LOI will appear in the
Move from SD Card from the
.
Make
Copy
Copy or centre press
Card). The screen will go to the OOI
SD
83
Set LOI
visibility
Set LOI colour
© Satmap Systems Ltd 2015