Accessories; Bike Mount; Vehicle Mount; Carry Cases (Standard & Deluxe) - satmap active12 User Manual

17. Accessories

Accessories
The following accessories are available from
Satmap. For a full range, please visit
www.satmap.com.

17.1 Bike Mount.

The Bike Mount has a robust, flexible fitting
and is designed for using the Active 12 GPS
unit on a bike. It can be attached to the handle
bars, stem or crossbar, allowing you to get the
most out of your cycling and mountain biking
experience.The Standard Battery Back of the
Active 12 is replaced with a Mount Battery
Back which has a moulded section and clips
onto the Bike Mount.

17.2 Vehicle Mount.

The Vehicle Mount is a tough unit designed
for using the Active 12 GPS in motor vehicles.
It has a powerful suction cup for attachment
to smooth surfaces such as a windshield. It
can also be fitted to any flat surface, such as
the dashboard, using the adhesive Mounting
Plate. This product will primarily appeal to
drivers of off-road vehicles where navigation
on accurate topographical mapping is a must.
17.3 Carry Cases (Standard & Deluxe)
The Standard Carry Case has a padded
compartment for the Active 12, closed with a
Velcro top for fast access, and an elasticated
front mesh for additional storage.
The Deluxe Carry Case has a main padded
compartment for the Active 12 itself and a
secondary compartment, ideal for storing spare
© Satmap Systems Ltd
batteries, map cards, car keys, small mobile
phone, etc. There are also two mesh pockets
on either side. The zips are covered to provide
weatherproofing, and an additional elasticated
front mesh provides further storage.

17.4 Lanyard.

The Lanyard is 1.3m long, branded with the
Satmap logo, and is adjustable to fit most
requirements. It has two fittings on each end:
a metal clip for attaching to the D-Rings on the
side of the carry case, or a nylon hoop fitting
for attaching directly onto the shoulders of the
Active 12 itself.

17.5 Screen Cover.

The removable Screen Cover is made of tough
polycarbonate and is easily replaced, ensuring
the view of the map is always at its best and
never obscured by scratches.
17.6 ProSHIELD (Silicon protective
case)
The ProSHIELD is a silicon rubber protective
case that fits snugly around the Active 12 GPS
unit. It has been designed to provide increased
impact protection for the Active 12, allowing it to
survive drops of up to 3m onto concrete. It also
provides additional environmental protection
against water and dust (IP67), making it ideal
for operating the unit in extreme conditions.
Available in black orange, sand or green.
90
Bike Mount Vehicle Mount
Standard & Deluxe Carry Case
Lanyard
Spare screen covers
© Satmap Systems Ltd 2014