Operating; Power Supply; External Supply - ALGE-Timing Timy Manual

2.

Operating

2.1.

Power Supply:

The Timy has many possibilities for the power supply:
External Supply (+8 to 15 VDC):
• Power Supply NG13A (Socket 2 of Timy)
• Power Supply NG13 (Socket 7 of Timy)
• External Battery (e.g. 12 Lead-acid accumolator connected to Socket 2 or 7)
Internal Power Supply:
The Timy has a battery compartment that holds 6 AA-batteries. You can select between different
batteries.
• Alkaline Batteries:
• NiCd-Rechargeable Batteries: for all operations at low temperatures (below freezing)
• NiMH-Rechargeable Batteries: for operations that do not happen at low temperatures
2.1.1.

External Supply:

A external supply of the Timy from +8 to 15 VDC is possible. The ALGE NG13A is the ideal
external power supply, since it keeps the DIN-socket for the photocell free. Also the ALGE NG13
works with the Timy.
It is not allowed to use the NLG8 and NLG4 since the power output is too high and it might
destroy the Timy.
It the external supply is 11.5 VDC or higher integrated rechargeable batteries will be charged.
Power Supply NG13A:
External Battery:
Version: E-2001-12-20
Timy Timy
Timy Timy Timy
only for Timy without internal printer
(below freezing)
Power Supply NG13:
Page 8