Accessory - ALGE-Timing Timy Manual

4.

Accessory

NiCd-Battery-Set TY-NC1:
includes a set of 6 NiCd rechargeable batteries with 1,0 Ah each
NiNH-Battery-Set TY-NM:
includes a set of 6 NiMH rechargeable batteries with 1,5 Ah each
Power Supply NG13A:
to supply the Timy form the mains or to charge the internal rechargeable batteries
Thermo Paper RTP:
roll of paper for the internal printer or printer P5-25
Docking Station TIDO:
external Docking Station with separate connections for all 9 channels, built in speech
amplifier, RS 232 interface, RS 485 interface, etc.
Push Button 023-xx:
for manual start or finish impulses
Startgate STSc:
startgate for skiing - ask your ALGE representative for different models
Photocell RLS1n:
photocell with transmitter/receiver unit and separate reflector for distances between 1,5 to
about 25 m
Photocell RLS1nd:
photocell with separate transmitter and receiver unit for distances up to about 100 m
Photocell RLS3c:
Three-Fold-Photocell for athletic or other options
Startmicrophone SM8:
start detection through the sound of a start gun, to screw on the start gun
Display Board GAZ4:
display board available in different sizes, configurations to show the time, or ID-number and
time
15 cm Digit reading distance of about 60 m
25 cm Digit reading distance of about 100 m
45 cm Digit reading distance of about 160 m
Printer P5-25:
protocol printer to connect at the Timy (only usable with external power supply)
Speech Amplifier:
to add at the start-impulse-line in order to be able to communicate through the same cable
between start and finish:
Speech Amplifier SV4:
Speech Amplifier SV4-S:
Speech Amplifier SV4-SM: speech amplifier with switch to turn the microphone on or off
Headset Q34:
for speech communication between start and finish
Version: E-2001-12-20
Timy Timy
Timy Timy Timy
simple speech amplifier
speech amplifier with switch to turn the microphone on or off
and connection for a Startmicrophone SM8
Page 19