Table of Contents
Advertisement
Via the build-in DIP-switch, the GT-1205A can be configured as
3-Port Ethernet switch or 2-Port Redundant media converter.
With the 3-Port Switch mode, it can operate Store-and-Forward
mechanism with high performance, with the 2-Port redundant
mode, it provides rapid fiber redundancy of link for highly critical
Ethernet
applications.
recover function. If the destination port of a packet is link down,
it forwards the packet to the other port of the backup pair.
As the GT-1205A Media Converter fully complies with IEEE
802.3
10Base-T,
1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit
media conversion installation is quite quick and easy by simple
plugging and playing feature.
With 1000Base-SX / LX SFP ports, the GT-1205A is with high
reliability and flexibility to extend the distance up to 550m,
10km, or longer. It depends on the 1000Base-SX / LX SFP
transceiver modules.
1.3 Product Features
Standard
Comply with IEEE 802.3 10Base-T
l
Comply with IEEE 802.3u 100Base-TX
l
Comply with IEEE 802.3ab 1000Base-T
l
Comply with IEEE 802.3z 1000Base-SX / LX
l
IEEE 802.3x Full-Duplex Flow-Control, Back-Pressure in Half-
l
Duplex eliminate packets loss
Interface
Dual 1000Base-SX / LX SFP Fiber-Optic Slots
l
One 10/100/1000Base-T Copper, auto MDI/MDIX function
l
Auto-Negotiation for 10/100/1000Base-T; Half-duplex or Full-
l
The
redundant-mode
IEEE
802.3u
supports
100Base-TX,
IEEE
auto-
802.3ab
7
Advertisement
Table of Contents
