Options While On Calls; Call Waiting; Last Number Redial - AT&T TL7601 User Manual

Remote dial pad operation
PHONE 0:00:30
1-234-5678
1
MUTE/FLASH button
NOTES:
1. Pressing
FLASH to
CALL/
access services
from your local
telephone service
provider will not
affect the elapsed
time, which will
continue to record
the total talk time.
2. You cannot press
OFF
to exit
/CLEAR
call waiting without
ending the call.

Options while on calls

Call waiting

If you subscribe to call waiting service with
your local telephone service provider, you
will hear a beep in the headset if there is an
incoming call while you are already on a call.
Press
CALL/
or press and hold the
the headset to put your current call on hold
and take the new call. Press
on the remote dial pad or press and hold the
FLASH key on the headset at any time
MUTE/
to switch back and forth between calls.
To end call waiting call, press
headset.
When you connect the headset with a corded
phone using LIFTER MODE, press the flash but-
ton on the corded phone to switch back and
forth between calls.

Last number redial

• While on a call, pressing
remote dial pad only displays the number
last dialed.
• The displayed number is dialed if you
CALL
press
Press CLEAR on the dial pad or press
OFF/
OFF on the headset to exit the call.
ON/
14
FLASH on the remote dial pad
MUTE/
.
/FLASH
FLASH key on
FLASH
CALL/
OFF on the
ON/
or on the