Cleaning The Cutter Blade Exit Area; Materials Required - Brady BBP 35 User Manual

Printer Maintenance

Cleaning the Cutter Blade Exit Area

This procedure cleans the cutter blade exit area and the exit chute.

Materials Required

• BBP
• Isopropyl Alcohol
To clean the exit chute:
Moisten a swab from the cleaning kit with the alcohol, then clean the exit chute entrance
1.
and exit chute ramp.
Note:
tilt the printer up on its side.
®
BBP 35/37 User's Manual
®
35/37 Cleaning Kit
To reach all areas of the exit chute, you can close the enclosure cover and
178 Rev A