Brady BBP 35 User Manual page 212

Troubleshooting
Problem
Ribbon Errors (continued)
Current ribbon color: Black
For this multi-color job, load this
ribbon last.
To continue, load another required
ribbon, then press any key.
Small Cell Errors
Error reading media memory cell.
Error 48
Error reading media memory cell.
Error: 49
Error reading media memory cell.
Error: 50
Error reading media memory cell.
Error: 51
Media remaining value has
reached 0.
Error: 52
®
BMP 35/37 User's Manual
Cause
Currently installed ribbon is a
continuous color monochrome
black ribbon.
Note: If multi-color print job is
selected, the label quality is better
when black is printed on top of the
other colors.
Incorrect supply is installed.
Media sensor cannot detect
supply type.
Printer cannot read/write to the
tape cell.
If the calculated CRC does not
match with what is read from the
tape smart cell, the data may be
corrupted.
The Tape cell is the wrong
version.
- or -
Printer class is not valid.
- or -
Printer version is not valid.
Number of feet stored in tape cell
has decremented to zero.
196
Corrective Action
Load required ribbon color.
Insert media memory cell again or
replace media
Open cover and install tape
correctly. The message
automatically clears.
If error persists, contact Technical
Support.
Open cover and install tape
correctly. The message
automatically clears.
If error persists, contact Technical
Support.
Open cover and install tape
correctly. The message
automatically clears.
If error persists, contact Technical
Support.
Replace media or install new tape
roll.
Rev A