Brady BBP 35 User Manual page 110

Printing
Print Speed
You can change the print speed to be faster or slower than the default print speed of the
installed media. Reducing the print speed produces better print quality at the expense of speed.
Higher speed can result in fainter print.
To adjust the print speed:
With a label in the Editor, touch Print
1.
In the Print dialog box, touch Advanced Settings
2.
Press Print Speed button.
3.
In the Print Speed area, touch the appropriate box to increase or decrease the print speed.
4.
The selected print speed setting stays in effect for all subsequent print jobs with the currently
installed media. When new media is installed, the print speed level is reset to the default
setting. The print speed level is also reset by rebooting the system.
Adjusting Print Offset
Print offset moves the image slightly in one direction or another on the label. Adjust Offset is
typically used to do a fine adjustment of the printed image on a die-cut label, or to move the
image slightly closer or further from the edge of a continuous supply.
Horizontal Offset shifts the printed portion of the label to the right or left. Vertical Offset shifts
the printed portion of the label up or down.
To adjust the print offset:
In the Adjust Offset area, touch the horizontal and/or vertical offset data field and enter the
5.
adjustment value.
When finished with Advanced Settings:
Touch OK
6.
You are returned to the Print dialog box.
When ready to print, touch Start Print
7.
®
BBP 35/37 User's Manual
.
94
.
.
.
Rev A