Brady BBP 35 User Manual page 42

System Defaults
A check digit is used for error detection in a barcode. It consists of a single digit computed
from the other digits in the barcode. If you want to use a check digit:
Touch Include check character.
6.
When Include check character is touched, the Readable check character button displays. If
7.
you want the check digit to display with your barcode, touch Readable check character.
When using symbology Code 39 or Code 128, you are given the option to have the start/stop
code readable with the barcode. The start code is a special character that signals the start of the
barcode. Likewise, the stop code is a character that signals the end of the barcode.
If you want to display the start/stop code for the chosen symbology:
Touch Readable start/stop (*).
8.
A barcode is made up of a series of narrow and wide bars and spaces (called elements). The
difference between the width of the narrowest and widest element is the ratio. Not all barcode
types allow you to change the ratio. If you are using a Barcode Type that does not support this
option, the Ratio field will not display.
To change the ratio (when available):
Under Ratio, touch the desired ratio to use.
9.
®
BBP 35/37 User's Manual 26 Rev A