Service Information; Specifications - Stanley STDH8013 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

f Regularly use the soft brush or dry cloth to clean the

ventilation slot of the equipment / tools / charger.

f Regularly use a damp cloth to clean the motor

housing. Please do not use any abrasive cleaning

agents or solvent-based cleansing agents.

f Regularly open the clamping chuck and tap it gently to

remove any internal dust (after installation).

CLEANING

Warning! Once the visible dust build-up is found at

and/or around the ventilating ports, immediately flush

the dust and powder within the host shell with clean dry

air. To perform this procedure, wear the approved safety

equipment and dust mask.

ACCESSORIES

The performance of your tool depends on the accessory

used. STANLEY accessories are engineered to

high quality standards and designed to enhance the

performance of your tool. By using these accessories you

will get the very best from your tool.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your STANLEY

product needs replacement, or if it is of no further

use to you, do not dispose of it with household

waste. Make this product available for separate

collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials. Local regulations may provide for

separate collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.