Service Information; Technical Data - Stanley SCH12S2K Original Instructions Manual

STANLEY provides a facility for the collection and
recycling of STANLEY products once they have
reached the end of their working life. To take
advantage of this service please return your product to
any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the address
indicated in this manual. Alternatively, a list of authorised
STANLEY repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Batteries
STANLEY batteries can be recharged many times. At the end
of their useful life, discard batteries with due care for our
environment:
• Run the battery down completely, then remove it from the
tool.
• NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorized repair agent or a local recycling station.
NOTES
STANLEY's policy is one of continuous improvement to our
products and as such, we reserve the right to change product
specifications without prior notice. Standard equipment and
accessories may vary by country. Product specifications may
differ by country.
Complete product range may not be available in all countries.
Contact your local STANLEY dealers for range availability

SERVICE INFORMATION

STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers are
staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you.

TECHNICAL DATA

Technical data Voltage
No-load speed:
Impact rate
Max torque
Chuck capacity
Maximum drilling capacity:
Wood
Metal
concrete
SCH12S2K
V 10.8
DC
min 0-400/0-1500
-1
min 0-6000/0-22500
-1
Nm 26
mm 10
mm 20
mm 10
mm 8
(Original instructions)
CHARGER
Input Voltage
Output Voltage
Output Current(DC)
Approx. charge time
BATTERY
Voltage
Capacity
Type
Level of sound pressure according to EN 60745:
Sound pressure (L )
pA
Sound pressure uncertainty (K
Sound power (L )
WA
Sound power uncertainty (K
Vibration Total Values a
h
(a )S =
h
Uncertainty (K) =
(a )D =
h
Uncertainty (K) =
(a )ID =
h
Uncertainty (K) =
VIBRATION
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by EN 60745
and may be used for comparing one tool with another. The
declared vibration emission value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used. The vibration level may increase above
the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
ENGLISH
SC121
V 220-240
AC
V
DC
A
min 70(1.5Ah)
SB12S
V
DC
Ah
Li-Ion
dB(A)
) dB(A)
pA
dB(A)
) dB(A)
WA
(Triax Vector Sum)
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
22
1.25
10.8
1.5
82
3
93
3
0.5
1.5
1.0
1.5
11.7
1.5
11