Setting Or Changing The Direct Out Patch - SoundCraft Si Compact User Manual

NOTE: If the chosen input source for a channel is LINE type (e.g AES or MADI) the GAIN
control will default to TRIM and the 48v switch will be unlit and have no function.
NOTE: It is only possible to patch LINE sources to the four stereo channels.
NOTE: Stereo patching always happens as odd/even pairs.
NOTE: If an FX processor has no stereo channel assigned as a return then it is not possible
to mix to the associated FX bus. See tOTEM for further details.

Setting or Changing the Direct Out Patch

The DIRect OUT PATCH screen shows the current direct output patch with an orange 'tick' other
outputs that are in use have a gray 'tick' whilst unused patches have no 'tick' (in this case from
channel name Bass DI which is channel 1 on the console to analogue output 1). To change to
another destination simply touch the icon or browse alternative destinations using the SCROLL/
ADJUST encoder or left/right (< >) arrows on the touch screen.
NOTE: The system will provide a warning if you attempt to use a patch that is already in use
allowing you to either continue or abort the action.
To have the system automatically patch multiple channels press the AUTO COMPETE button; this
will increment the input by 1 and patch by 1 until a logical group of patches is complete.
To leave the PATCH set-up press MENU, CUE LIST or LEX
43
Soundcraft Si Compact User Guide 0311