The Transmitter - GM-Racing Leopard 90505 Instruction Manual

The RC-System & Transmitter
Here you get an overview of the Remote Control System of the Fun-Truggy Leopard 4WD 1/8 and its
various functions and settings. Before the first trip should be sure all of these functions and settings
have read and understood.
Insert 8 AA batteries or battery in the battery compartment of the transmitter and receivier 4 in the battery
box. Pay attention to the polarity!
Remote Control (transmitter):
1st On / off switch:
2nd Steering wheel:
3rd Steering Trim:
4th Throttle:
5th Throttle Trim:
6th Control Light:
7th Antenna:
8th Servo Reverse:
6. Control Light
1. On/Off Switch
13 GM-Racing Leopard
Turns the power of the channel,
To the direction control
The straight one exit
Controls the speed of the model
To adjust the neutral position of the gasifier
Shows the battery voltage
Transmits the signals to the receiver
Changes the direction of rotation of the servos (here are no adjustments
necessary.
8. Servo Reverse
8. Servo Reverse

The Transmitter

7. Antenna
3. Steering Trim
5. Throttle Trim
2. Steering Wheel
4. Throttle
90505 & 90505.RTR