GM-Racing Leopard 90505 Instruction Manual page 19

How to do / Errors
Problem
Engine is not starting
Engine can not spin
Engine stops immediately
Low Engine Power
Engine is hot
Engine swallowed itself
Engine stops during acceleration
from idle.
Engine stutter when cornering ride
19 GM-Racing Leopard
Possible Error
No Fuel
Glow Plug is not glowing
Wrong Fuel
Engine to hot
Engine Drowned
Air-Filter blocked
Exhaust blocked
Glow Ignitor Empty
Engine Drowned
Engine don´t Spin
Idle speed is too low
Glow Plug dirty / Weak
Air bubbles in the fuel tube
Engine to hot
Tank pressure is too low / Tube blocking
A mixture of full fat
Engine to hot
Glow Plug leak
Dirty carburetor
Clutch grind
Shaft poorly stored
Engine worn
A mixture of full lean
A mixture of full fat
Wrong or Broken Fuel
Ventilation blocked
Engine is to hot
A mixture of full lean
A mixture of full fat
Glow Plug dirty / Weak
Air bubbles in the fuel tube
A mixture of full lean
A mixture of full fat
Glow Plug dirty / Weak
Idle speed is too low
Fuel is empty
Idle speed is too low
To do
Put Fuel in
Check, if needed Change
Use the Recommended Fuel
Let them cooling
Pull 1Time without Glow Plug
Cleaning, Oil
Cleaning
Charge, Change
On the subject of glow plugs
On the subject of carburetor settings
On the subject of glow plugs
Check the Tube of Holes
On the subject of temperature Check
Cleaning the Fuel Tube
On the subject of Engine Tuning
Engine cooling
Change Glow Plug
Cleaning
Clean / Setting / Repair
looking for faults
New building
On the subject of Engine Tuning
On the subject of Engine Tuning
Try the Right / or a New one
cleaning
on the Subjekt of Engine Tuning
On the subject of Engine Tuning
On the subject of Engine Tuning
On the subject of glow plugs
Check the Tube of Holes
On the subject of Engine Tuning
On the subject of Engine Tuning
On the subject of glow plugs
setting
setting
90505 & 90505.RTR