The Remote Control System; Remote Control Transmitter - GM-Racing MRX5 Street Bike Instruction Manual

Table of Contents

Advertisement

REQUIRES (See also page 23)
Depending which Version (RTR or ARTR) you need different accessories:
90191.RTR:
everything is included, you only need 8 alkaline AA batteries e.g. No. 3426, or 8 AA battery cells e.g.
No. 3621 for transmitter and a 7,2 V Battery Pack (e.g. No. 98900) and a appropriate charger like the Graupner
Ultramat Series.
90191:
additionally you need a 2-channel radio system with one Servo (e.g. No. 94000 or 94010), electronic brush-
less Speedcontrol (e.g. Genius Race 80R No. 7157 or Genius 90 No. 7164), 7,2 V Battery Pack (e.g. No. 98900)
and a appropriate charger like the Graupner Ultramat Series.

THE REMOTE CONTROL SYSTEM

Here you get an overview of the remote control system of the MRX5 Street Bike and its various functions and settings.
Before the fi rst trip you should be sure all of these functions and settings have read and understood.
Please consider also the references on page 16!
Place 8 AA batteries in the battery compartment of the transmitter. Pay attention to the polarity!
REMOTE CONTROL (TRANSMITTER)
1. ON / OFF switch: Turns the power on/off
2. Steering wheel: Controls direction (left/right) of the model
3. Steering trim: Adjusts the "hands off" direction of the model
4. Throttle Trigger: Controls speed (forward/brake) of the model
6. Power LED: indicates adequate battery power
7. Antenna: Transmits signal to the model
The remote control system of the Street Bike is optimally adjusted by the factory. Nevertheless you should read the
following chapter, maybe slight adjustments on the remote control should be necessary. For further information to the
remote control system please refer to the enclosed XG-4i manual.
07
ON/OFF-
Switch
Power-
LED
Antenna
Steering Trim
Stop/Neutral
Forward
Battery Cover
GM-Racing 90191 MRX5 Street Bike
Steering Wheel
Brake

Advertisement

Table of Contents
loading

Table of Contents