Display And Controller - Ultimaker 2 Extended User Manual

DISPLAY AND CONTROLLER

When turning on your Ultimaker 2 Extended, you will always see the Ultimaker logo first after which you will go to the
main menu. The main menu offers three options, as shown in the image below.
PRINT
The PRINT menu simply allows you to select one of the print files on the SD card and will automatically start the print
after that.
MATERIAL
Via the MATERIAL menu you can either change the filament on your Ultimaker 2 Extended or change the settings of
material profiles. When selecting CHANGE the Ultimaker 2 Extended will automatically heat up the nozzle and unload
the current filament, after which you can insert new material. In the SETTINGS menu you can select material profiles and
change their settings in the Customize menu.
20