Bandwidth Select; Time-Out Timer; Power Select - Motorola CP110 Series User Manual

The CPS allows the user to program
frequencies, PL/DPL codes, as well as other
features such as: Direct Frequency Input*,
Talkaround*, Bandwidth Select, Time-out
Timer, Power Select, Battery Type Select, Scan
List, Call Tones, Scramble, Reverse Burst etc.
CPS is a very useful tool as it can also lock the
front-panel radio programming or restrict any
specific radio feature to be changed (to avoid
preset radio values from being accidentally
erased). It also provides security by giving the
option to set up a password for profile radio's
management. Please refer to Features
Summary Chart Section at the end of the user
guide for details.
Notes:
• (**) CPS Programming Cable (P/N RKN4155)
is an accessory sold separately. Please
contact your Motorola Point of Purchase for
more information.
48
English

Bandwidth Select

Default setting for Bandwidth select is 12.5 kHz
for UHF and 25 kHz for VHF. Some frequencies
have selectable channel spacing, which must
match other radios for optimum audio quality.

Time-Out Timer

Transmissions can be terminated by setting up
a 'time-out" timer. Radio can be programmed
to turn the radio OFF in either 60, 120 or
180 seconds.

Power Select

Power Select allows you to toggle the radio
between high and low power per channel. If the
channel you try to program does not support
high power, the radio generates a bad chirp.
The power levels for CP110™ Series 2W
toggle between 1W and 2W. The default
setting is 2W.