Nuisance Channel Delete; Cps (Computer Programming Software) - Motorola CP110 Series User Manual

NUISANCE CHANNEL DELETE

Nuisance Channel Delete allows you to
temporarily remove channels from the 'Scan
List'. This feature is useful when irrelevant
conversations on a 'nuisance' channel tie up
your radio's scanning features. To delete a
channel from the scan list:
• Start 'Scan Mode' by short pressing the SB2
button (*)
• Wait until the radio stops on the channel you
wish to eliminate, then long press the SB2
button to delete it.
• The channel will be removed until you exit
'Scan Mode' by pressing the SB2 button again
or if radio is turned OFF.
Note: (*) Assumes the SB2 button is not
programmed to another function different
from the default.
CPS (COMPUTER PROGRAMMING
SOFTWARE)
Radio to be
programmed
USB
Connector
Drop-in
Charger
Tray
Programming
Mini-connector
Cable
The easiest way to program or change features
in your radio is by using the Computer
Programming Software (CPS) and the CPS
Programming Cable(*).
To program, connect the radio via the Drop-in
Charger Tray and CPS Programming Cable as
shown in the picture above.
CPS
47
English