Charging a High Capacity or Ultra
High Capacity Battery
Removable
Removable
Piece
Piece
To convert the charger from the default setup to
accommodate the High capacity or Ultra High
capacity battery:
1.
Squeeze both tabs on each side of the
removable bracket in the drop-in charger tray
and lift the bracket from the charger tray.
24
English
2.
Removable
Removable
Piece
Piece
Turn around
Turn around
horizontal
3.
horizontal
180 degree
180 degree
Note:
Rotate the removable bracket 180 degrees and
replace it by fitting it in the charger slot until it
snaps. The label on the removable bracket
should show 'High & Ultra Capacity Battery'
facing front of the charger.
Repeat same procedure to return to the
charging a Standard Battery position. Label on
the removable bracket should show 'Standard
Battery' facing front.
Make sure the bracket is assembled
correctly for both standalone battery and
battery (with radio)