Side Buttons; The Lithium-Ion (Li-Ion) Battery - Motorola CP110 Series User Manual

• A Programmable Button
Default set to generate the current
programmed call tone.
• Programmable Button
B
Default set to preset Channel 1
• Programmable Button
C
Default set to preset Channel 2
Note: A short press of either preset button (B or C)
tunes the radio to the preset channel and
the radio will play a good chirp. You can
assign different functions to these buttons
via the CPS. For example: Backlight Time
Out, Reverse Burst, Power Select, Scan/
Nuisance Channel Delete, Monitor and Call
Tones. To learn more about how to program
these buttons refer to "Entering
Programming Mode" on page 37 and "CPS
(Computer Programming Software)" on
page 47
12
English

Side Buttons

Push-to-Talk (PTT) Button
Press and hold down this button to talk, release
it to listen.
Side Button 1 (SB1)
The Side Button 1 is a general button that can
be configured by the CPS. The default setting
of the SB1 button is 'Monitor'.
Side Button 2 (SB2)
The Side Button 2 is a general button that can
be configured by the CPS. The SB2 button
default setting is 'Scan/Nuisance Channel
Delete'.

The Lithium-Ion (Li-Ion) Battery

CP110™ Series provides different types of
batteries. For more information, see "Battery
Features" on page 14.