Nuisance Channel Delete; Customer Programming Software; (Cps) - Motorola XT460 User Manual

NUISANCE CHANNEL DELETE

Nuisance Channel Delete allows you to
temporarily remove channels from the Scan
List. This feature is useful when irrelevant
conversations on a 'nuisance' channel ties up
the radio's scanning feature.
To delete a channel from the Scan List:
• Start Scan mode by short pressing the SB2(*)
button.
• Wait until the radio stops receiving on the channel
you wish to eliminate. Long press the SB2 button
to delete it. You cannot delete the channel with
scan enabled (home channel).
• The channel will not be scanned again until you
exit the Scan mode by short pressing the SB2
button again or by turning OFF the radio and
back ON.
Note: (*) This assumes the SB2 button is not
programmed for a different mode.
40
English

CUSTOMER PROGRAMMING SOFTWARE

(CPS)

Radio to be
programmed
CPS Programming Cable
Drop-In Tray Charger Tray
Figure 1: Setting up the radio to the CPS
The easiest way to program or change features
in your radio is by using the Customer
Programming Software (CPS) and the CPS
Programming Cable(*). CPS Software is
available for free as web based downloadable
software at:
www.motorolasolutions.com/XTseries
USB Ports