Replacing The Touch Pad; Procedure - Dell inspiron 11 3000 series Service Manual

Replacing the touch pad

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your
instructions in After working inside your
home page at www.dell.com/regulatory_compliance.

Procedure

1. Slide the tabs on the touch pad into the slots on the palm rest and keyboard assembly.
2. Align the screw holes on the touch pad with the screw holes on the palm rest and keyboard assembly.
3. Replace the screws that secure the touch pad to the palm rest and keyboard assembly.
4. Turn the palm rest and keyboard assembly over.
5. Ensure there is a gap between the mylar and the palm rest and keyboard assembly.
1. mylar
6. Adhere the tape to the touch pad.
7. Slide the touch-pad cable into the connector on the touch pad and close the latch to secure the cable.
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
2. palm rest and keyboard assembly
20
37