Replacing the hard drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your
instructions in
After working inside your
home page at www.dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Procedure
1.
Align the screw holes on the hard drive with the screw holes on the hard-drive bracket.
2.
Replace the screws that secure the hard-drive bracket to the hard drive.
3.
Slide and connect the hard-drive assembly to the connector on the system board.
4.
Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly.
5.
Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
Post-requisites
1.
Replace the battery.
2.
Follow the procedure from step 2 to step 5 in
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
"Replacing the base
cover".
12
25