Removing The I/O Board; Prerequisites; Procedure - Dell inspiron 11 3000 series Service Manual

Removing the I/O board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your
instructions in After working inside your
home page at www.dell.com/regulatory_compliance.

Prerequisites

1. Follow the procedure from step 1 to step 6 in
2. Remove the battery.

Procedure

1. Open the latch and disconnect the I/O-board cable from system board.
2. Remove the screw that secures the I/O board to the base cover.
3. Push the securing tab to release the I/O board from the base cover.
4. Slide and lift the I/O board off the base cover.
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
"Removing the base cover".
7
17