Replacing The Base Cover; Procedure - Dell inspiron 11 3000 series Service Manual

Replacing the base cover

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your
instructions in After working inside your
home page at www.dell.com/regulatory_compliance.

Procedure

1. Replace the I/O board.
CAUTION: To avoid damage to the computer, ensure that the USB and HDMI port cut-outs on the base-cover
assembly is correctly aligned with the USB and HDMI ports on the palm rest and keyboard assembly.
2. Place the base-cover assembly on the palm rest and keyboard assembly while aligning the USB and HDMI port cut-
out on the base-cover assembly with the USB and HDMI ports.
3. Slide the tabs on the base-cover assembly into the slots on the palm rest and keyboard assembly and snap the
base-cover assembly into place.
4. Replace the screws that secure the base-cover assembly to the palm rest and keyboard assembly .
5. Replace the screw cap on the base-cover assembly.
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
4
13