Removing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your
instructions in
After working inside your
home page at www.dell.com/regulatory_compliance.
Prerequisites
1.
Follow the procedure from step 1 to step 6 in
2.
Remove the battery.
3.
Remove the
wireless
4.
Remove the
display
hinges.
5.
Remove the
display
bezel.
6.
Remove the
display
panel.
Procedure
CAUTION: Place the display-panel assembly on a soft and clean surface to avoid scratching the display.
1.
Using a plastic scribe, gently pry the camera from the display back-cover and antenna assembly.
2.
Disconnect the camera cable from the camera.
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
"Removing the base
card.
cover".
35
63