Replacing the memory module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your
instructions in
After working inside your
home page at www.dell.com/regulatory_compliance.
Procedure
1.
Align the notch on the memory module with the tab on the memory-module slot.
2.
Slide the memory module firmly into the memory-module slot at an angle and press it down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
1.
memory module
3.
notch
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
2.
4.
memory-module slot
tab
10
21