Replacing The I/O Board; Procedure; Post-Requisites - Dell inspiron 11 3000 series Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your
instructions in After working inside your
home page at www.dell.com/regulatory_compliance.

Procedure

1. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.
2. Slide the ports on the I/O board into the slots on the base cover and snap the I/O board into place.
3. Align the screw hole on the I/O board with the screw hole on the base cover and replace the screw.
4. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.

Post-requisites

1. Replace the battery.
2. Follow the procedure from step 2 to step 5 in
computer. After working inside your computer, follow the
computer. For more safety best practices, see the Regulatory Compliance
"Replacing the base cover".
8
19