Other Operations - Sony CMT-HPX11D Operating Instructions Manual

Tips
• When the DVD function is selected when you load a
DVD, the disc playbacks automatically.
• You can change the play mode between 1DISC, ALL
DISCS and ALBM using the on-screen display as
follows:
1
Press DVD DISPLAY in stop mode.
The Control Menu appears.
M/m
2
Press
ENTER.
3 M/m
Press
ENTER.

Other operations

To
Stop play
Pause
(Except for
JPEG)
Select a track,
image or chapter
Select an MP3 or
JPEG album
Locate a point
quickly in fast
forward or fast
2)
reverse
(Lock Search)
(Except for MP3/
JPEG)
Watch frame by
2)
frame
(Slow-motion
Play)
(DVD, Video CD
only)
Enjoy the Slide
Show
(Only one
direction)
(JPEG only)
14 GB
to select "PLAY MODE", then press
to select desired play mode, then press
Do this
Press x.
1)
Press X.
Press again to resume
play.
Press ./> repeatedly either
during playback or while playback
is paused.
Press ALBUM +/– repeatedly
after step 2.
Press m/M during play. For
DVD or Video CD, each time you
press the button, searching speed
changes as follows:
1 (slow) y 2 (faster than 1)
For CD, searching speed does not
change (1 (slow) play).
To return to Normal Play, press
nN.
Press X during play, then press
or y. Each time you
SLOW
press the button, the playback
speed changes as follows:
Playback direction
2 y y 1 y
Opposite direction (DVD only)
y 1
2
To return to Normal Play, press
nN.
Press M while a JPEG image is
displayed. Each time you press
M during a Slide Show, the
interval time of the Slide Show
changes. Press nN when you
want to return to Normal Play.
To Do this
Press </,. Each time you
Rotate the
3)
press ,, the image is rotated by
current image
90° clockwise. Each time you
(JPEG only)
press <, the image is rotated by
90° counterclockwise.
Select a disc in Press DISC SKIP repeatedly (or
stop mode any one of the buttons (DISC 1 – 5
and DISC +1 on the unit)).
Switch to DVD Press any one of the buttons
function from (DISC 1 – 5 and DISC +1 on the
another source unit) (Automatic Source
Selection).
Exchange discs Press EX-CHANGE on the unit.
during playback
Press Z on the unit.
Remove a disc
1)There may be some disturbance in the video image.
2)No sound is output.
3)You cannot rotate the image during Slide Show.
Press nN to return to Normal Play before
performing this operation.
Notes
• If DVD playback is paused for approximately one
hour, the system automatically turns off.
• Depending on the DVD or Video CD, some
operations may be restricted.
• 2 channel sound is heard when using headphones.
• An album that does not include any MP3 audio tracks
or JPEG image files is skipped.
• Maximum album number: 99
• The maximum number of MP3 audio tracks or JPEG
image files that can be contained on a single album is
250.
• Playback is possible up to 8 levels.
• If you attach the ".MP3" extension to data not saved
in MP3 format, the system is unable to recognize the
data and generates a loud noise which could damage
your speaker system.
• When playing the data disc (CD-ROM/CD-R/CD-
RW) contained MP3 audio tracks and JPEG image
files, select "CUSTOM SETUP" from the setup
items, then set "DATA CD PRIORITY" (page 24).
• The following discs take a longer time to start
playback:
– A disc recorded with complicated tree structure
– A disc recorded in Multi Session
– A disc to which data can be added (non-finalized
disc)