Televes T.0X 565301 User Manual page 32

HDTV TRANSMODULATOR - Dual ATSC/QAM to QAM
11
Advanced functions allow you to change the address of the module.
Using TSuite software in local mode, programming modules
through the CDC.
Preliminary considerations
1. Direct connection between the PC and the CDC module with a
data cable RJ45-RJ45.
2. The transmission of information is done through a network
interface. To do this, configure the computer's IP to be on the
network of IP CDC module. The CDC IP module can be configured
by the programmer, but by default is 169.254.1.253.
3. The remote configuration of a module through the CDC is
only possible when neither the handheld programmer nor the
RS232-RJ45 cable is connected to the module.
Steps to follow
1
Assign the computer an IP address on the network of the CDC.
32