Televes T.0X 565301 User Manual page 12

HDTV TRANSMODULATOR - Dual ATSC/QAM to QAM
The unit also features 2 sets of daisy-chain
connectors for the power and control buses.
Special care must be taken so as to never connect
control bus jumpers to power connectors or vice
versa. Doing so will cause irreparable damage to
the units.
Connector 7 is the handheld programmer unit (ref.
7234) connection.
Front light indicators 8 to 12 are alarm/status
LEDs that give monitoring information about the
unit status, as follows:
Table 5.- FRONT UNIT LED ALARMS
TEMPERATURE (LED no. 8)
LED Colour Unit internal temperature (ºF)
Solid green
Slow blink orange between 149 ···185
Fast blink red
SATELLITE INPUT STATUS - for A and B tuners (LEDs no. 9 &11)
LED Color
Solid green
Solid orange
Solid red
OFF INPUT DISABLED
QAM OUTPUT SIGNALS (LEDs no. 10 &12)
QAM channel status
LED Color
Solid green
Fast blink green
Solid orange
Fast blink orange
Solid red
under 149
over 185
Tuner status
LOCKED
LOCKED
UNLOCKED
LOCKED
SPECIAL MODE
OVERFLOW
OVERLAP
UNLOCKED
Comments
SAFE
WARNING
OVER TEMP
Comments
Good input SNR
Low input SNR
-
-
Comments
NORMAL mode
CW, MUTED, & NULL modes
-
between QAM output carriers
-
12