Do you have a question about the Oasis V-130 and is the answer not in the manual?
Questions and answers
Mrs denise j Howard
May 22, 2025
How to properly clean the dirty water tank
1 comments:
Mr. Anderson
May 25, 2025
To properly clean the dirty water tank of the Vax V-130:
1. Switch off and unplug the cleaner. 2. Release the handle using the handle release pedal. 3. Unlatch the back part of the tank lid and remove the lid. 4. Raise the handle to the upright position and remove the dirty water tank. 5. Pour out dirty water from the rear of the tank. 6. Remove debris from the recovery tank filter and rinse with clean water. 7. Replace the lid by positioning the front under the tabs and rotating it down. Ensure it is secure on all sides. 8. Reattach the tank securely to the cleaner.
Need help?
Do you have a question about the Oasis V-130 and is the answer not in the manual?
Questions and answers
How to properly clean the dirty water tank
To properly clean the dirty water tank of the Vax V-130:
1. Switch off and unplug the cleaner.
2. Release the handle using the handle release pedal.
3. Unlatch the back part of the tank lid and remove the lid.
4. Raise the handle to the upright position and remove the dirty water tank.
5. Pour out dirty water from the rear of the tank.
6. Remove debris from the recovery tank filter and rinse with clean water.
7. Replace the lid by positioning the front under the tabs and rotating it down. Ensure it is secure on all sides.
8. Reattach the tank securely to the cleaner.
This answer is automatically generated