Maintenance; Removal And Replacement - Vax VPUP2000P User Manual

Maintenance

Dirt Container & Filter:

Removal and Replacement

WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
NOTE: Unplug the vacuum cleaner before changing filter.
NOTE: For best performance, replace filter annually
depending on level of use.
Cleaning the Central Filter
1. Press the latch above the dirt container and remove the
dirt container from the vacuum cleaner. Remove the dirt
container lid by turning it anticlockwise.
2. Hold the dirt container and grasp the top of the filter.
Twist and pull the filter up and out. Empty the dirt
container completely.
8
3. Each time the dirt container is emptied, the filter should
be cleaned. Tap the filter against the side of a rubbish bin
until the dust stops falling from the filter. Return the filter to
the dirt container. Push the filter into place to prevent dirt
leakage.
Align slots on the lid with the tabs on the dirt container.
Push the lid down and twist clockwise.
NOTE: There is a guideline on the back of the dust container
lid. Align the tabs on the dirt container and turn clockwise
until secure.
4. Return the dirt container to the vacuum cleaner. Set the
aligning tab on the bottom of the dirt container into the
rectangular slot on the cleaner (inset). Push to click
into place.
AU: 1300 361 505 / NZ: 0800 800 900
Vax Service line