Turbo Tool - Vax VPUP2000P User Manual

Maintenance
Remove the nozzle guard by removing the five (5) screws.
Look for any obstructions and remove brushbar if necessary.
Clearing Blockages from the

Turbo Tool

Turn the Turbo Tool over and slide off the O-ring.
Pivot lowering housing and remove clog.
10
To re-asseble, be sure that the tabs are engaged. Pivot the
lower housing closed. Slip the O-ring into the groove at the
neck of the Turbo Tool to complete re-assembly.
'O' Ring
'O' Ring
AU: 1300 361 505 / NZ: 0800 800 900
Tabs
Vax Service line