Nilfisk-ALTO C 100.3 User Manual
  1. Manuals
  2. Brands
  3. Nilfisk-ALTO Manuals
  4. Pressure Washer
  5. C 110.1 X-TRA
  6. User manual

Nilfisk-ALTO C 100.3 User Manual

Hide thumbs

Advertisement

Table of Contents

15-03-2006
Nilfi sk-ALTO C 100.3
Nilfi sk-ALTO C 110.1
Nilfi sk-ALTO C 110.1 X-TRA
User Manual ....................................................
3 - 15
EN

Advertisement

Table of Contents
loading

Related Manuals for Nilfisk-ALTO C 100.3

Summary of Contents for Nilfisk-ALTO C 100.3

  • Page 1 15-03-2006 Nilfi sk-ALTO C 100.3 Nilfi sk-ALTO C 110.1 Nilfi sk-ALTO C 110.1 X-TRA User Manual ............ 3 - 15...

  • Page 2: Table Of Contents

    Index 1 Safety precautions and warnings ..........3 2 Description ................5 3 Before you start using your pressure washer ......6 4 Operating your pressure washer ..........8 5 After using your pressure washer ...........10 6 Maintenance ................11 7 Trouble shooting ..............13 8 Further information ..............14 9 Technical data ................15 10 Declaration ................15 1 Safety Precautions and Warnings...
  • Page 3 Disconnect from electrical pletely unwinded to prevent the Water connection power supply before carrying cable from overheating. Connection to the public out user maintenance. mains according to regula- To ensure the appliance If an extension cable is used, tions. safety only use original spare the plug and the socket must be Inlet hose can be connected parts from the manufacturer...

  • Page 4: Description

    2 Description 2.1 Application This high-pressure washer has Only use the high-pressure been developed for domestic washer for purposes described use within: in this manual. - Car, motorbike, boat, cara- The safety precautions must be van, trailer, patio/drive/fl ags- observed to prevent damage tones, woodwork, brickwork, to the machine, the surface to barbecue, garden furniture,...

  • Page 5: Before You Start Using Your Pressure Washer

    3 Before you start using your pressure washer 3.1 Mounting of lance and 1. Press the lance and nozzle nozzle holder holder (12) on to the ma- chine. 3.2 Mounting of holder for 1. Press the holder for electric electric cable cable (14) on to the machine.
  • Page 6 3.4 Mounting of trolley 1. Place the trolley handle on handle (models with trol- the machine. ley handle) 2. Secure the handle by mount- ing the 2 screws. 3.5 Mounting of quick 1. Screw the quick coupling coupling tight on to the water inlet (2). Note: The inlet fi...

  • Page 7: Operating Your Pressure Washer

    4 Operating your pressure washer 4.1 Connection of high pres- 1. Mount the high pressure sure hose hose on the outlet (3). 4.2 Mounting of spray lance, nozzles and foam sprayer 1. Push the spray lance (6) into the spray gun (7) and screw it on.
  • Page 8 4.4 Start and stop of the The spray lance is affected Do not cover the machine machine by a thrust during operation during operation or use it in a - therefore always hold it fi rmly room without adequate ventila- with both hands.

  • Page 9: After Using Your Pressure Washer

    5 After using your pressure washer 5.1 Storing the washer The machine should be sto- 3. Stop the machine, unplug red in a frost-free room! and wind up hose and cable. 4. Place spray handle, nozzles Pump, hose and accessories and other accessories in the should always be emptied of holders of the machine.

  • Page 10: Maintenance

    6 Maintenance WARNING! Always discon- Clean the connectors of dust nect the electrical plug from the and sand. socket prior to maintenance or Rinse the detergent spraying cleaning. attachment after use. Clean the nozzles. To ensure a long and problem free working life, please take Any repair should always be the following advice:...
  • Page 11 6.3 Cleaning of machine The machine should be kept vents clean so as to let cooling air pass freely through the ma- chine vents. 6.4 Greasing of couplings To ensure an easy connec- tion and that o-rings do not dry up, the couplings should be greased regularly.

  • Page 12: Trouble Shooting

    7 Trouble-shooting To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk- ALTO service organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. Defective socket Try another socket. Fuse has blown Replace fuse.

  • Page 13: Further Information

    8 Further information 8.1 Recycling the washer Make the old cleaner unusable As specifi ed in European Direc- immediately. tive 2002/96/EC on old electri- cal and electronic appliances, 1. Unplug the cleaner and cut used electrical goods must the electric cable. be collected separately and recycled ecologically.

  • Page 14: Technical Data

    Description of the equipment: High pressure washer Equipment name Nilfi sk-ALTO Model C 100.3-5 / C 110.1-5 / C 110.1-5 X-TRA Dimension 255 x 240 x 630 mm Rated output voltage AC 230-240 V Rated frequency 50 Hz Rated input power 1.3 - 1.4 kW...
  • Page 17 FRANCE Fax: +48 22 738 37 51 Nilfi sk-ALTO E-mail: info@nilfi sk-alto.pl ALTO France SAS www.nilfi sk-alto.pl Aéroparc 1 PORTUGAL 19 rue Icare 67960 Entzheim Nilfi sk-ALTO Tel.: +33 3 88 28 84 00 Division of Nilfi sk-Advance Lda. Fax: +33 3 88 30 05 00 Sintra Business Park E-mail: info@nilfi...

Table of Contents