Subaru Forester 2004 Service Manual page 38

Diagnostics Procedure without Diagnostic Trouble Code (DTC)
Step
9 CHECK ABSCM&H/U.
Measure the resistance between ABSCM&H/U
terminals.
Terminal
No. 22 — No. 23:
10 CHECK WIRING HARNESS.
Measure the resistance between connector
(B36) or (F45) and chassis ground.
Connector & terminal
LHD: (B37) No. 23 — Chassis ground:
RHD: (F45) No. 13 — Chassis ground:
11 CHECK WIRING HARNESS.
1) Connect the connector to ABSCM&H/U.
2) Measure the resistance between connector
(B36) or (F45) and chassis ground.
Connector & terminal
LHD: (B37) No. 23 — Chassis ground:
RHD: (F45) No. 13 — Chassis ground:
12 CHECK POOR CONTACT IN ABSCM&H/U
CONNECTOR.
Check
Is the resistance more than 1
MΩ?
Is the resistance less than 0.5
Ω?
Is the resistance more than 1
MΩ?
Is there poor contact in
ABSCM&H/U connector?
ABS-37
ABS (DIAGNOSTIC)
Yes
Go to step 10. Replace the
ABSCM only.
<Ref. to ABS-8,
ABSCM (ABS
CONTROL MOD-
ULE), REPLACE,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
Go to step 11. Repair the har-
ness.
Go to step 12. Repair the har-
ness.
Repair the con- Replace the
nector. ABSCM only.
<Ref. to ABS-8,
ABSCM (ABS
CONTROL MOD-
ULE), REPLACE,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
No