Abs Warning Light Illumination Pattern - Subaru Forester 2004 Service Manual

ABS (DIAGNOSTIC)

10.ABS Warning Light Illumination Pattern

A: INSPECTION
(1) Ignition switch
(2) ABS warning light
(3) OFF
1) When the ABS warning light does not illuminate in accordance with this illumination pattern, there must be
an electrical malfunction.
2) When the ABS warning light remains constantly OFF, repair the ABS warning light circuit or diagnosis cir-
cuit. <Ref. to ABS-29, Diagnostics Procedure without Diagnostic Trouble Code (DTC).>
NOTE:
Even though the ABS warning light does not go out 1.5 seconds after it illuminates, the ABS system operates
normally when the ABS warning light goes out while driving at approx. 12 km/h (7 MPH). However, the Anti-
lock brakes do not work while ABS warning light is illuminated.
ABS Warning Light Illumination Pattern
(3)
(1)
(6)
(2)
(4) ON
(5) START
(6) Goes out
ABS-24
(5)
(4)
(7)
(6)
(8)
(7)
(8)
(4)
Illuminates
1.5 sec.
ABS00403