Subaru Forester 2004 Service Manual page 116

Hide thumbs Also See for Forester 2004:
Table of Contents

Advertisement

Diagnostics Procedure with Diagnostic Trouble Code (DTC)
Step
14
CHECK TONE WHEEL RUNOUT.
Measure the tone wheel runout.
15
CHECK RESISTANCE OF ABS WHEEL
SPEED SENSOR.
1) Turn the ignition switch to OFF.
2) Disconnect the connector from ABS wheel
speed sensor.
3) Measure the resistance between ABS
wheel speed sensor connector terminals while
shaking the harness lightly.
Terminal
Front RH No. 1 — No. 2:
Front LH No. 1 — No. 2:
Rear RH No. 1 — No. 2:
Rear LH No. 1 — No. 2:
16
CHECK GROUND SHORT OF ABS WHEEL
SPEED SENSOR.
Measure the resistance between ABS wheel
speed sensor and chassis ground.
Terminal
Front RH No. 1 — Chassis ground:
Front LH No. 1 — Chassis ground:
Rear RH No. 1 — Chassis ground:
Rear LH No. 1 — Chassis ground:
17
CHECK HARNESS/CONNECTOR BETWEEN
ABSCM&H/U AND ABS WHEEL SPEED
SENSOR.
1) Connect the connector to ABS wheel speed
sensor.
2) Disconnect the connector from ABSCM&
H/U.
3) Measure the resistance at ABSCM&H/U
connector terminals.
Connector & terminal
DTC 22
LHD: (B301) No. 11 — No. 12:
RHD: (F49) No. 11 — No. 12:
DTC 24
LHD: (B301) No. 9 — No. 10:
RHD: (F49) No. 9 — No. 10:
DTC 26
LHD: (B301) No. 14 — No. 15:
RHD: (F49) No. 14 — No. 15:
DTC 28
LHD: (B301) No. 7 — No. 8:
RHD: (F49) No. 7 — No. 8:
Check
Is the runout less than 0.05
mm (0.0020 in)?
Is the resistance the following
value?
Front: 1 — 1.5 kΩ
Rear: 1.025 — 1.265 kΩ
Is the resistance more than 1
MΩ?
Is the resistance the following
value?
Front: 1 — 1.5 kΩ
Rear: 1.025 — 1.265 kΩ
ABS-115
ABS (DIAGNOSTIC)
Yes
Go to step 15.
Replace the tone
wheel. Front: <Ref.
to ABS-21, Front
Tone Wheel.>
Rear: <Ref. to
ABS-22, Rear
Tone Wheel.>
Go to step 16.
Replace the ABS
wheel speed sen-
sor. Front: <Ref. to
ABS-15, Front
ABS Wheel Speed
Sensor.> Rear:
<Ref. to ABS-18,
Rear ABS Wheel
Speed Sensor.>
Go to step 17.
Replace the ABS
wheel speed sen-
sor. Front: <Ref. to
ABS-15, Front
ABS Wheel Speed
Sensor.> Rear:
<Ref. to ABS-18,
Rear ABS Wheel
Speed Sensor.>
Go to step 18.
Repair the har-
ness connector
between
ABSCM&H/U and
ABS wheel speed
sensor.
No

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents