Using Your Ice Maker (Ice & Water Models) - Fisher & Paykel ActiveSmart E372B Installation Instructions And User Manual

Using your ice maker (Ice & Water models)
Ice On/Off
Your automatic ice maker is designed to dispense ice cubes into
the ice storage bin below until it senses the bin is full. If you
require more ice, the storage bin can be removed and ice will
dispense into the top freezer bin.
Before you start using you automatic ice maker
When you first turn your refrigerator on after installation, the
■ ■
ice maker will be off.
To turn your ice maker on press the
■ ■
the ICE ON/OFF icon will be illuminated when the ice maker is on.
Press and hold
■ ■
then close the door(s). The ice tray will flip twice and empty the
water into the bin below. The ice tray will flip only after the doors
are closed.
Force another cycle, this step helps remove any manufacturing
■ ■
and transportation dust in the ice tray.
Empty the water and correctly replace the bin, ensuring the scoop
■ ■
is located at the front of the bin.
If the bin is full of ice, inserted incorrectly or if all bins are
■ ■
removed, the ice maker will not operate. When the bin is inserted
correctly the scoop will be on the right hand side of the bin or at
the front of the bin.
Once your ice maker is in operation, discard the first 3 harvests
■ ■
of ice (8 ice cubes are produced per harvest). This will flush away
any impurities in the water line and ensure that you get the best
quality ice. We recommend that you also do this after vacations or
extended periods of not using ice.
We recommend that you turn the ice maker off if:
■ ■
– The water supply is to be off for several hours, or
– The ice storage bin is to be removed for a period of time, or
– You are going on holiday/vacation.
, and buttons together for 4 seconds
button. The light above
Turning ice maker on
E402B, E442B, E522B,
RF402B, RF442B, RF522A,
RF522W and RF522B
RF610A/RF540A
Ice storage bin and
scoop in correct position
31