Water Filter (Ice & Water And Automatic Ice Models Only) - Fisher & Paykel ACTIVESMART E372B Installation Manual

(ICE & WATER AND AUTOMATIC ICE MODELS ONLY)
All the water to your refrigerator is filtered to remove impurities through a filter
cartridge located in a position of your choice outside the refrigerator. This will need
changing approximately every 6 months.
There is a replacement indicator icon
● ●
Automatic Ice models) and external display (Ice & Water models only) which will appear
when the filter needs replacing. It will flash, as a reminder, when water is dispensed.
Replacement filter cartridges can be purchased online from fisherpaykel.com or by
● ●
calling Fisher & Paykel Customer Care. Details of the replacement filter cartridge are
labelled on the cartridge. Instructions on how to install your replacement water filter are
provided with the filter.
To reset the filter indicator
IMPORTANT!
We recommend the water filter to be used from the time of installation.
● ●
Do not reset indicator before filter is changed or filter monitoring will be inaccurate.
● ●
Press and hold
● ●
The icon on the internal and external displays will turn off when reset.
● ●
To disable the filter indicator
Note: if disabled, you will not be reminded to next change your filter.
When no filter is fitted, you can disable the filter indicator.
● ●
Press and hold
● ●
once on the internal and external displays.
To turn this feature on press
● ●
internal and external displays will flash twice.
WATER FILTER
and for 4 seconds to reset the internal and external filter indicators.
, and for 4 seconds to turn this feature off, the
, and
on the internal control panel (Ice & Water and
together for 4 seconds, the
icon will flash
icon on the
31