Fisher & Paykel ActiveSmart E372B Installation Instructions And User Manual page 6

Safety and warnings
4
Keep ventilation openings, in the appliance enclosure or in the
■ ■
built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the
■ ■
defrosting process.
Do not damage the refrigerant circuit.
■ ■
In case of damage to the refrigerant circuit, ventilate the area
■ ■
by opening all windows. Do not operate electrical equipment or
any other equipment that may produce arcs, sparks or flames
in the area. Contact your Fisher & Paykel Authorised Repairer
immediately to arrange for the appliance to be repaired.
It is hazardous for anyone other than an authorised service
■ ■
person to service this appliance. In Queensland the authorised
service person must hold a gas work licence or authorisation for
hydrocarbon refrigerants to carry our service or repairs which
involve removal of covers.
Electrical
This appliance must be installed in accordance with the installation
■ ■
instructions before use.
To allow disconnection of the appliance from the supply after
■ ■
installation, incorporate a switch in the fixed wiring in accordance
with the wiring rules.
Never unplug your refrigerator by pulling on the power cord.
■ ■
Always grip the plug firmly and pull straight out from the outlet.
Do not plug in any other appliance at the same power point as your
■ ■
refrigerator or use extension cords or double adapters.
Repair or replace immediately all electric service cords that have
■ ■
become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion along its length or at either the plug or
appliance end.
If the power supply cord is damaged, it must only be replaced by
■ ■
your Fisher & Paykel Authorised Repairer because special purpose
tools are required.