Fisher & Paykel ActiveSmart E372B Installation Instructions And User Manual page 18

Installation instructions
16
Rear compartment cover installation
Using the measurement guide located on the rear compartment cover. Mark out 16 mm (5/8"),
1
on the end of the tubing (refer to Diagram 10).
Firmly insert the marked water tube into the water (solenoid) valve until the marked line is not
2
visible (refer to Diagram 11).
Pull gently on tubing to ensure it is locked (refer to Diagram 12).
3
The completed installation should look like Diagram 13. Turn isolating tap on and check that all
4
connections are dry and free of drips.
Coil water line tubing behind the refrigerator and push into position being careful not to kink or
5
squash the water line running into the water (solenoid) valve.
Diagram 10
The water filtration system is tested and certified by NSF International against NSF/ANSI
Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane,
Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for
the reduction of Chlorine Taste and Odour and Nominal Particulate Class I to a capacity of
2,838 Litres (750 gallons).
Diagram 11
Diagram 13
Completed installation
Diagram 12