Using Your Water Dispenser (Ice & Water Models) - Fisher & Paykel ActiveSmart E372B Installation Instructions And User Manual

Using your water dispenser (Ice & Water models)
28
Ensure your ice and water system has been correctly installed by
following the 'Installation instructions' section before using you
water dispenser.
Dispensing
Your water dispenser has been designed for one-handed operation.
■ ■
To dispense water push the dispensing pad gently, using a glass or
■ ■
container. This pad requires only a gentle press to activate.
To stop the flow of water, simply pull your glass away from the
■ ■
dispensing pad.
Please remember that pressing very hard against the dispensing pad will not encourage the
dispenser to operate faster or produce greater quantities of water.
Important!
To avoid damage to property or personal injury do not put hands, fingers or objects up the
dispenser opening.
Please note that once installation is complete a few drips may appear out of the dispenser over
the next few days as the remaining trapped air is cleared.
Dispenser Lock
The DISPENSER LOCK prevents water from being dispensed. This is useful
when you are cleaning the external display or when there are small
children around.
Press and hold the
■ ■
The light above the DISPENSER LOCK icon will be illuminated.
■ ■
Pressing the water dispenser pad will cause a raspberry sound indicating
■ ■
to the user that water cannot be dispensed.
To de-activate the DISPENSER LOCK, press and hold the
■ ■
4 seconds. The light above the DISPENSER LOCK icon will no longer be
illuminated and water dispensing will be enabled.
button for 4 seconds to activate DISPENSER LOCK.
button for
Water dispenser
Dispenser Lock