Windows Nt 4.0 Dhcp Server; Verifying The Installation Of The Dhcp Server - Avaya one-X 1600 Series Administrator's Manual

Deskphone value edition
Hide thumbs Also See for one-X 1600 Series:
Table of Contents

Advertisement

Server Administration
In
Table
5, the 1600 Series IP Telephone sets the system values to the DHCPACK message
field values shown.
Table 5: DHCPACK Setting of System Values
System Value
IPADD
NETMASK
GIPADD
TLSSRVR
HTTPSRVR
DNSSRVR
DOMAIN
DHCP lease time
DHCP lease renew time
DHCP lease rebind time

Windows NT 4.0 DHCP Server

Verifying the Installation of the DHCP Server

Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Settings-->Control Panel.
2. Double-click the Network icon.
3. Verify that Microsoft DHCP Server is listed as one of the Network Services on the
Services tab.
4. If it is listed, continue with the next section. If it is not listed, install the DHCP server.
42 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0
Set to
The yiaddr field.
Option #1 (if received).
Option #3 (if received, which might be a list of IP
addresses).
The siaddr field, if that field is non-zero.
The siaddr field, if that field is non-zero.
Option #6 (if received, which might be a list of IP
addresses).
Option #15 (if received).
Option #51 (if received).
Option #58 (if received).
Option #59 (if received).

Advertisement

Table of Contents
loading

Table of Contents