Table of Contents
Advertisement
Administrating the Device
Video: Configure OSD, Overlay, Profile, ROI and AOI
42
7.
Please wait for timer countdown, and then you can use IPWizard II to search the
device again.
Warning!!! The download firmware procedure cannot be interrupted. If the power and/or
network connection are broken during the download procedure, it WILL cause serious
damage to the device.
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error rate
possibly and don't allow any other clients to access this unit during updating procedure.
Be aware that you SHALL NOT turn off the power during updating the firmware and wait
for finish message.
Furthermore, the firmware upgrade procedure is always risky and do not try to upgrade
new firmware if it's not necessary.
System Restart:
The device is restarted without changing any of the network settings. It means the IP
address of the device will not change after firmware upgrade.
This 3MP device provides 2 modes of video profile. The first one is 3Mega mode which
supports video resolution up to 3 Mega-pixel. The second one is 2Mega mode which
supports video resolution up to 2 Mega-pixel. User only can select either 3Mega or 2Mega
mode to operate the camera. Switching 3Mega and 2Mega mode, the device will take time
to reboot system.
2MP device also provides 2 modes of video profile.
Common
Video Profile:
Advertisement
Table of Contents
